Slideshow

EQUIPMENT

CNC Turning Equipment:

  • (2) Mazak DualTurn 20 Twin Spindle Chucking Lathe.
    Ø8” chucks. Workpiece capacity: Ø200mm x 150mm length.
  • (2) Doosan Puma 2600 Lathe.
    Ø12” chuck. Ø480mm Maximum turning diameter. 760mm Maximum workpiece length.
  • (2) Doosan Puma 240M Turn/Mill Chucking Lathe.
    Ø200mm Chuck. Milling/Drilling/Tapping Capability. X, Z, & C-Axis machining.
  • Daewoo 2000Y 4-Axis Turn/Mill Center.
    Ø250mm Chuck. Milling/Drilling/Tapping Capability. X, Z, C, & Y-Axis machining.
  • (2) Doosan Puma 240MS Turn/Mill Barfeed Lathe.
    Ø2” (50mm) Bar capacity. Sub-spindle. Milling/Drilling/Tapping Capability. IEMCA 12 ft. Bar Magazine.
  • Mazak QT250HP Chucking Lathe.
    Ø250mm Chuck. Ø254mm x 450mm length.
  • Mazak QT250HP Barfeed Lathe.
    SMW Servo Bar Feed Magazine. Ø67mm” Bar Capacity. Parts Catcher.
  • Doosan Puma 280 Lathe.
    Ø265mm Chuck. Ø480mm Maximum turning diameter. 600mm Maximum workpiece length.
  • Daewoo Puma 300B Lathe.
    Ø265mm Chuck. Ø480mm Maximum turning diameter. 600mm Maximum workpiece length.
  • (4) Doosan Lynx Lathes.
    Ø200mm Chuck. Ø210mm Maximum turning diameter. 300mm Maximum workpiece length.
  • Daewoo Puma 230C Lathe.  
    Ø250mm Chuck. Ø250mm Maximum turning diameter. 520mm Maximum workpiece length.
  • (2) Kira KDL-V80 Vertical Turning Centers.  Ø15″ & Ø18″ Chucks. Ø30″ Swing.
  • Mori-Seiki VL550 Vertical Turning Center.
    Ø24” Chuck. Ø30” x 16” Workpiece Capacity.

CNC Milling Equipment:

  • Mazak HCN-6000II Heavy Duty Horizontal Machining Center.
    (2) 500mm Pallets. CAT 50, 40HP Spindle. 120 -Tool Magazine. Ø900mm x 1000mm high workpiece area. X-Y-Z Travel=800mm x 800mm x 800mm. 0.001° B-Axis Positioning. Probing.
  • Mazak FH-6000 Heavy Duty Horizontal Machining Center.
    (2) 500mm Pallets. CAT 50, 40HP Spindle. 80-Tool Magazine. Ø900mm x 1000mm high workpiece area. X-Y-Z Travel=800mm x 800mm x 880mm. 0.001° B-Axis Positioning. Probing.
  • Kitamura HX500G Horizontal Machining Center.
    (2) 500mm Pallets. CAT 50, 40HP Spindle. 100-Tool Magazine. Ø800mm x 1100mm high workpiece area. X-Y-Z Travels=870mm x 800mm x 930mm. Full 4th (B)Axis. Probing.
  • Mazak HCN-4000II 4-Axis High Speed Horizontal Machining Center.
    (2) 400mm Pallets. CAT 40, 30HP, 18,000 RPM Spindle. 60-Tool Magazine. Ø630mm x 900mm high workpiece area. X-Y-Z Travel=560mm x 630mm x 640mm. Probing.
  • Mazak FH-4800 4-Axis High Speed Horizontal Machining Center.
    (2) 400mm Pallets. CAT 40, 30HP, 12,000 RPM Spindle. 80-Tool Magazine. Ø630mm x 900mm high workpiece area. X-Y-Z Travel=560mm x 630mm x 640mm. Probing.
  • Okuma MA400-HA 4-Axis High Speed Horizontal Machining Center.
    (2) 400mm Pallets. CAT 40, 30HP Spindle. 60-Tool Magazine. Ø600mm x 700mm high workpiece area. X-Y-Z Travel=560mm x 610mm x 625mm. Probing.
  • Okuma MA650VB Heavy Duty Vertical Machining Center.
    1530mm x 660mm Table. CAT 50, 30HP, High Torque Spindle. 40-Tool Magazine. 1530mm x 660mm x 660mm work cube. Probing. Indexer.
  • Okuma Genos M560V High Speed Vertical Machining Center.
    1300mm x 560mm Table. CAT 40, 30HP, 15,000RPM Spindle. 32-Tool Magazine. 1050mm x 560mm x 460mm work volume. Probing.

CNC Sawing/Blanking Equipment:

  • Kasto C10 High Precision, High Speed CNC Cold Saw. Ø1/2” to Ø4-1/4” x 20 ft. Bar Capacity. Saw-cut length tolerances as close as ±.002” with surface finishes as fine as Ra32. Standard tolerances of ±0.1mm.
  • (2) Ø10” Capacity CNC Automatic Bandsaw. Ø1/2” to Ø10” x 24 ft. bar capacity.

Ancillary Equipment:

  • Automatic Cycle Universal and Plunge Grinding. Capacity from Ø16mm to Ø250mm x 250mm long.
  • Surface Grinding. 7.5” x 12” table capacity.
  • Broaching. 15 Ton x 50” Stroke Capacity. Internal and Slab Broaching.
  • (2) Barber Coleman 6-10 Gear Hobbing Machine.
  • Kin-E-Fac Spline/Thread Rolling Machine.
  • Almco OR-3 Vibratory Finishing Machine.
  • Ram Parts Wash-Rinse-Dry System.
  • A Variety of Hydraulic Marking and Assembly Presses.
  • Multiple Pin Stamp Marking/Serializing Machines.
  • Full Complement of Tool Room Lathes, Mills, Saws, Grinders, and Welders.
  • Factory Cat Floor Scrubber. Tenant Floor Scrubber.
  • Donaldson Coolant Recycling/Reclamation System.

Quality & Metrology Equipment:

  • 1500 Sq. Ft. Metrology/Inspection Lab. Climate Controlled and Monitored.
  • Brown & Sharpe Xcel 7107SP UHA DCC Coordinate Measuring Machine (CMM).
    PCDMIS Software. Renishaw TP20 Probe. 1 Cubic Meter Work Area. Sub-micron volumetric accuracy.
  • Hommel Opticline Contour 810 3-Axis Optical Profile Measurement System.
    Ø150mm x 800mm length workpiece capacity. Automatically and accurately measures and logs all external features of cylindrical components including lengths, diameters, radii, angles, flats, cross-holes, threads, run-outs, concentricity, etc. Accurate to within ±.000080 inch.
  • Tesa-Scan 50+ Optical Profile Measurement System. Ø50mm  x 250mm length workpiece capacity.
  • S-T 20-3600-02 10x/20x Optical Comparator.
  • Laser Pin/Plug Calibration Unit.
  • Handheld Precision Gages, Calibrated and Tracked with GAGEtrak® Calibration Software.
  • Profilometer/Surfometer surface roughness gauges.
  • Calibrated, Lab Accuracy Gage Block Sets (NIST traceable)